Filters and Accessories

Filter Series 136, 100 Bar :

The pressure filters of 136 series are suitable for a working pressure up to 100 bar.
The pressure peaks are absorbed by a sufficient margin of safety. The 136 series filter is in-line mounted.
Stainless steel filter elements are made up of several layers of 316 mesh which sintered together to form an integrated porous element.

Applications :
Hydraulic power units in Nuclear Industry, Naval, Oil & Gas sector, Mining Industry, Water Treatment Plants, Desalination, Fire Protection Equipments, Food Industry Machinery.

Features :

• Temperature range: -20°C to + 200°C
• Operating medium: Filtered tap water, other medium on request
• Max. operating pressure: 100 Bar
• Test pressure: 300 Bar
• Connection system: Threaded ports
• Installation position: Vertical
• Filter Grade : 1µm, 3µm, 5µm, 10µm, 20µm, 25µm, 50µm and 100µm.

Filter Series 136HP, 200 Bar :

The pressure filters of 136HP series are suitable for a working pressure up to 200 bar.
The pressure peaks are absorbed by a sufficient margin of safety. The 136HP series filter is in-line mounted.
Stainless steel filter elements are made up of several layers of 316 mesh that are sintered together to form an integrated porous element.

Applications :
Hydraulic power units in Nuclear Industry, Naval, Oil & Gas sector, Mining Industry, Water Treatment Plants, Desalination, Fire Protection Equipments, Food Industry Machinery.

Features :

• Temperature range: -20°C to + 200°C
• Operating medium: Filtered tap water, other medium on request
• Max. operating pressure: 200 Bar
• Test pressure: 500 Bar
• Connection system: Threaded ports
• Installation position: Vertical
• Filter Grade : 1µm, 3µm, 5µm, 10µm, 20µm, 25µm, 50µm and 100µm.

Filter Housing :

10” & 5” Slimline Plastic Housings, Available in low pressure plastic or stainless steel, as well as high pressure stainless steel.
Standard filtration level 25 micro-meters (absolute) for tap water systems.

Applications :
Hydraulic power units in Nuclear Industry, Naval, Oil & Gas sector, Mining Industry, Water Treatment Plants, Desalination, Fire Protection Equipments, Food Industry Machinery.

Features :

• Temperature range: Max. 52°C
• Operating medium: Filtered tap water, other medium on request
• Max. operating pressure: 8.6 Bar
• Connection system: Threaded ports of 1/4″ to 1 1/2″ BSP.
• Installation position: Vertical
• Filter Grade : 25µm for tap water systems.

Propylene Glycol :

Propylene Glycol is a clear, colourless practically odourless liquid with a slightly sweet taste. It is hydroscopic, completely soluble in water and miscible and organic solvents. – practically non hazardous.
Propylene Glycol USP meets or surpasses all United States Pharmacopoeia XX and Food Chemicals Codex requirements. TLV adopted.

Typical Properties :

• Density : (at 25°C) 1036 g/l.
• Flash Point : Tag Closed Cup, 99°C.
• Freezing Point: Below -60°C
• Solubility in water : Complete -60
• Viscosity: 56 cp at 20°C

Fire and Explosion Data :

• Flash Point : 107°C open cup
• Auto Ignition : 421°C
• Flammable Limits : 2.6% – 12.6%
• Explosion Hazard: Very slight

PX Filter Cartridges :

The Purtrex depth filtration cartridge meets the requirements of the most non-critical applications or as an economic pre-filter, where long life, high purity and low change outs are required.
Using FDA approved materials meeting NSF standard 42, Purtrex contains no anti-static, wetting agents, solvents or blinders offering outstanding value and flexibility.

Features :

• Long-life
• Low cost,
• Additive-free
• Temperature range: Max. 60°C

Stainless Steel Filter Element :

Stainless steel filter elements are made up of several layers of 316 mesh that are sintered together to form an integrated porous element. The middle mesh is of very fine gauge and determines the filtration efficiency of the elements. This layer is then overlaid with inner and out layers of coarser mesh, to give support and protection.
The elements are a typical surface filter and the contaminants are retained on the surface of the filtration layer, this makes cleaning and back flushing a simple process. These filter elements should be ultrasonically cleaned to give best results.

Stainless steel filter elements are particularly useful in heavily contaminated applications and for use as pre-filters before disposable type final filters.
Gaskets are required with stainless steel filter elements, the options are Viton, PTFE or high temperature annealed copper.

Filter Grade : 1µm, 3µm, 10µm, 25µm, 100µm.