Polyhydron

1PS pressure switches are single set point type pressure switches having spring loaded sealed piston construction. Encapsulated design for protection against dust. Six pressure ranges available which can be adjustable upto 10, 50, 100, 200, 350 and 420 bar.

1RC Radial piston pump comes with 3, 5 or 7 pumping elements. External mounting type, Face mounting, Fixed delivery. Bi-directional rotation of shaft. Available with option of extension shaft for through drive.

2CI valves are available with the pilot operated check valve facility on either A or B or both A and B threaded ports.
The hydraulic opening operation for free flow in reverse direction is achieved by means of internal pilot pressure available from the other working port.

2RC Radial piston pump comes with 3, 5 or 7 pumping elements. External mounting type, Face mounting, Fixed delivery. Bi-directional rotation of shaft. Available with option of extension shaft for through drive.
Flows can be combined internally, externally to feed one circuit or used independently to feed Two circuits.

2TCL10 double throttle cum check valve are meant for controlling flow in one direction in circuit by simple throttling of flow. Reverse flow is free and is independent of throttle condition in opposite direction in same path.

11RC radial piston pump comes with 5 or 7 pumping elements. External mounting type, Face mounting, Fixed delivery. Bi-directional rotation of shaft. Available with option of extension shaft for through drive.

12RC radial piston pump comes with 5 or 7 pumping elements. External mounting type, Face mounting, Fixed delivery. Bi-directional rotation of shaft. Available with option of extension shaft for through drive.
Flows can be combined internally, externally to feed one circuit or used independently to feed Two circuits.

BH series of Bell Housings is designed for coupling hydraulic pumps having ISO flanges to electric motors having metric flanges.
The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled.

BHP series bell housing assembly is designed for coupling hydraulic pumps having flanges to electric motors having metric flanges. These bell housings are precisely machined to reduce misalignment of coupled shafts.
The correct alignment of the shafts along with the cushioned power transmission through a resilient spider increases the life of the bearings of the pump/motor coupled.

CI Check Valve is a Seat type valve with internal drain. Available in Threaded or Sub-plate mounting construction with two pilot piston size options.

CIM06 modular valves are available with the pilot operated check facility on either ‘A’ or ‘B’ ports. The free flow in reverse direction is achieved by means of internal pilot pressure available from the other working port. Interface conforming to :
ISO 4401-AB-03-04-A
IS 10187
DIN 24340
To ensure proper closure of both valve poppets, both user connections should be unloaded when the control valve is in the neutral by connecting with the return line.

HP1*-D Hand Pumps are compact heavy duty pumps designed for industrial applications like operating small presses, fixtures as well as providing source of oil for hydraulically operated emergency equipment’s. These hand pumps are equipped with integral Rotary Directional Control Valve with two outlet ports for switching the flow between the two sides of a double acting cylinder. The Rotary valve has pressure holding ability.

HP 5012 & 5016 Hand pumps are designed with feature of automatic change-over from high discharge at low pressure to low discharge at high pressure. Collapsible Hand lever for compact size and short hand movement.

HP 5012**D & 5016**D Hand pumps are designed with feature of automatic change-over from high discharge at low pressure to low discharge at high pressure. These hand pumps are provided with integrated Rotary Directional Control Valves with two outlet ports for switching the flow between two sides of a double acting cylinder.

PCM20 valves are designed to control Double pumps of a Hi-Low system. The valve consists of a High pressure relief valve, a Check valve and a low pressure unloading valve. Unloading of pumps by Solenoid valve / Valves is an optional feature.

TCM06 is a double throttle cum check valve. Non pressure compensated, modular construction. Can be used as Metering-in or Metering-out device.